Booth Additive is an alkaline formulation, liquid preparation, to be used as an additive for the water treatment in the spray booths. It is very effective where mixed paints are used. The effect of Booth additive on the over sprayed paint, make sure that the washing chambers, plates and pipe work of the spray booth require less frequent cleaning and the over sprayed paint will float in a conventional denatured non - sticky form for easy removal.
Whenever you start a fresh bath make sure that you clean the booth and the sludge pit thoroughly. Fill the booth tank with fresh industrial water and start the circulation. Then Booth additive are added to the turbulent area of the reservoir at 1-2 litres per 1000 lts of water in the tank. This addition will give a pH of around 10. This pH will start dropping from the time the paint over spray is mixed with that.
To get the best performance of Bullows Booth additive, the pH must be maintained between the range of 9-10. To maintain the pH, regular replenishments should be made.
Spray Painting Equipment | Paint Circulation System | Paint Kitchen | Painting Automation | Paintshop Projects | Pre-treatment Plants | Powder Coating | Liquid Coating Plants